With its standard telescoping boom, articulated design and mini skid steer attachment plate, the Rayco 1800AWL provides the power and versatility you need for any job.
With its unique hydraulically expandable undercarriage — from 35″ (89 cm) to 43.5″ (111 cm) — the Boxer 700HDX is the ultimate in versatility.
The Boxer 600HD provides all the power you need for tough jobs.
For “big machine” tasks with a small footprint, the Boxer 385D is the mini skid steer for you!
The gas-powered Boxer 375 packs a lot of power in a small package, allowing you to reduce overhead and increase jobsite productivity.
Adapt your Bobcat mount to a universal mount.
Adapt your universal mount for Bobcat attachments.
The Universal Tilt Attachment allows 17-degree up and down movement for grading.
The multi-purpose tool includes rippers, tree boom and tow hitch.
Transport wheeled equipment and trailers.
The Universal Hitch Plate is a blank mounting plate for attachments.
This high-speed, low-torque auger drives runs up to 106 RPM.
This high-torque, low-speed auger drive provides up to 1,998 lb-ft (2,708.9 N·m) maximum output torque.
6 inch (15.24 cm) x 36 inch (91.44 cm) CDR Bullet tooth rock auger bit for tough soil and rock
6 inch (15.24 cm) x 36 inch (91.44 cm) HDF auger bit for light-moderate ground
9 inch (22.86 cm) x 36 inch (91.44 cm) CDR Bullet tooth rock auger bit for tough soil and rock
9 inch (22.86 cm) x 36 inch (91.44 cm) HDF auger bit for light-moderate ground
12 inch (30.48 cm) x 36 inch (91.44 cm) CDR Bullet tooth rock auger bit for tough soil and rock
12 inch (30.48 cm) x 36 inch (91.44 cm) HDF auger bit for light-moderate ground
15 inch (38.1 cm) x 36 inch (91.44 cm) HDF auger bit for light-moderate ground
18 inch (45.72 cm) x 36 inch (91.44 cm) CDR Bullet tooth rock auger bit for tough soil and rock
18 inch (45.72 cm) x 36 inch (91.44 cm) HDF auger bit for light-moderate ground
20 inch (50.8 cm) x 36 inch (91.44 cm) HDF auger bit for light-moderate ground
24 inch (60.96 cm) x 36 inch (91.44 cm) HDF auger bit for light-moderate ground
30 inch (76.2 cm) x 36 inch (91.44 cm) HDF auger bit for light-moderate ground
30 inch (76.2 cm) x 36 inch (91.44 cm) HTF auger bit for tree and shrub planting
36 inch (91.44 cm) x 36 inch (91.44 cm) HDF auger bit for light-moderate ground
36 inch (91.44 cm) x 36 inch (91.44 cm) HTF auger bit for tree and shrub planting
Adapts 2.00” Hex auger drive to 2.56” Round auger bit
Adapts 2.56” Round auger drive to 2.00” Hex auger bit
42-inch (106.68 cm) sweeper for clearing debris, general clean-up, snow removal and de-thatching lawns
48-inch (121.92 cm) sweeper for clearing debris, general clean-up, snow removal and de-thatching lawns
Control box required for hydraulic angling with sweeper attachment on 300/400 series
34.5-inch (87.63 cm) low-profile, straight-edge, general purpose bucket
42-inch (106.68 cm) low-profile, straight-edge, general purpose bucket
42-inch (106.68 cm) general purpose bucket with non-removable teeth
44-inch (111.76 cm) low-profile, straight-edge, general purpose bucket with 5.0 cubic feet capacity (0.14 cubic meters)
44-inch (111.76 cm) high-profile, straight-edge, light material bucket with 7.0 cubic feet capacity (0.2 cubic meters)
48-inch (121.92 cm) low-profile, straight-edge, general purpose bucket with 6.0 cubic feet capacity (0.17 cubic meters)
48-inch (121.92 cm) general purpose bucket with non-removable teeth
54-inch (137.16 cm) general purpose bucket with non-removable teeth
35-inch (88.9 cm) 4-n-1 Multi-Purpose Bucket functions as high dump, dozer blade, trash clamp and general purpose buckets
38-inch (96.52 cm) 4-n-1 Multi-Purpose Bucket functions as high dump, dozer blade, trash clamp and general purpose buckets
42.5-inch (107.95 cm) 4-n-1 Multi-Purpose Bucket functions as high dump, dozer blade, trash clamp and general purpose buckets
42-inch (106.7 cm) Rock Bucket with 3/4-inch (19 mm) tine diameter for sifting dirt, removing rocks and more
42-inch (106.7 cm) Rock Bucket with 1.125-inch (28.6 mm) tine diameter for sifting dirt, removing rocks and more
Bolt-on Bucket Tooth Bar for 42-inch (106.68 cm) General Purpose Bucket and 42.5-inch (107.95 cm) Multi-Purpose Bucket
Bolt-on Bucket Tooth Bar for 48-inch (121.92 cm) General Purpose Bucket
Bolt-on tooth bar fits 54-inch (137.16 cm) General Purpose Bucket
Bolt-on cutting edge for 42-inch (106.68 cm) General Purpose Bucket and Scrap Grapple
Bolt-on cutting edge for 44-inch (111.76 cm) General Purpose Bucket
Bolt-on cutting edge for 48-inch (121.92 cm) General Purpose Bucket and Scrap Grapple
Bolt-on cutting edge for use with 54-inch (137.16 cm) General Purpose Bucket
4-way adjustable 46-inch (116.84 cm) dozer blade
6-way adjustable 46-inch (116.84 cm) dozer blade with 6-degree tilt feature, usable with dual remote units
4-way adjustable 67-inch (170.18 cm) dozer blade
6-way adjustable 67-inch (170.18 cm) dozer blade with 6-degree tilt feature, usable with single remote units
6-way adjustable 67-inch (170.18 cm) dozer blade with 6-degree tilt feature, usable with dual remote units
48-inch (121.92 cm) snow blade with 30-degree left/right hydraulic angling
60-inch (152.4 cm) snow blade with 30-degree left/right hydraulic angling
Dual-stage hydraulic snow blower attachment throws snow up to 45′ (13.7 meters)
Backhoe attachment with 6.5′ (2 m) digging depth; 9′ (2.74 m) reach
Fixed Skid Hoe attachment with 51″ (129.5 cm) reach with 50″ (127.0 cm) digging depth
Swing Skid Hoe attachment with 68″ (172.7 cm) reach with 67″ (170.2 cm) digging depth
Swing Skid Hoe attachment with 68″ (172.7 cm) reach with 67″ (170.2 cm) digging depth for dual remote units
8-inch (20.32 cm), 2-tooth bucket for use with backhoe and fixed/skid hoe
10-inch (25.4 cm), 3-tooth bucket for use with backhoe and fixed/skid hoe
12-inch (30.48 cm), 3-tooth bucket for use with backhoe and fixed/skid hoe
16-inch (40.65 cm), 4-tooth bucket for use with backhoe and fixed/skid hoe
18-inch (45.72 cm), 4-tooth bucket for use with backhoe and fixed/skid hoe
42-inch (106.68 cm) brush grapple, ideal for removal of brush and refuse
48-inch (121.92 cm) brush grapple, ideal for removal of brush and refuse
54-inch (137.16 cm) brush grapple, ideal for removal of brush and refuse
42″ (107 cm) wide grapple root rake with 32.5″ (83 cm) grapple opening
48″ (121.92 cm) wide grapple root rake with 36″ (91.4 cm) grapple opening
36-inch (91.44 cm) scrap grapple for removal of brush, stump grindings and refuse
42-inch (106.68 cm) scrap grapple for removal of brush, stump grindings and refuse
48-inch (121.92 cm) scrap grapple for removal of brush, stump grindings and refuse
Hydraulic Breaker attachment delivers 550-1000 blows per minute
Cross-Cut Chisel Tool for use with the Hydraulic Breaker
Flat Chisel Tool for use with the Hydraulic Breaker
In-Line Chisel Tool for use with the Hydraulic Breaker
Moil Point Tool for use with the Hydraulic Breaker
Back-fill trenches, renovate turf, reseed, recondition infield mixes and de-thatch with the Power Box Rake attachment
Back-fill trenches, renovate turf, reseed, recondition infield mixes and de-thatch with the Power Box Rake attachment
Back-fill trenches, renovate turf, reseed, recondition infield mixes and de-thatch with the Power Box Rake attachment
Compactor plate to level and compact and compact sand, fill, recycled asphalt and slopes
Cement Bowl attachment for use in hard-to-reach areas, fence installation, concrete repair (sidewalks, driveways, etc.) and more
Reduce back-breaking labor by mobing your hardscape materials with the hardscape grapple.
As easy as dig, clamp, roll-up, lift and remove! Grasp and move vegetation for clean-up and collection with the 20.5″ (52 cm) jaw opening.
Hydraulic sod roller is able to lay sod rolls from 24″ (61 cm) to 36″ (91.4 cm) wide, and can up to 800 lbs (362.9 kg)!
Tamp down freshly laid sod with this water-weighted lawn roller.
Carry materials or grade and back-fill rough terrain with the Leveler/carry-all!
Cut, clear and mulch unwanted brush, thickets, grass and saplings up to 2″ (5 cm) diameter with the Rotary Brush Mower attachment!
The Power Shovel is ideal for removing and transplanting small trees, shrubs, bushes and ornamentals
The Rototiller attachment has a 40″ (101.6 cm) tilling width and 6″ (15.2 cm) digging depth.
36-inch (91.4 cm) Vibratory Roller for vibration tampening on sand, gravel, soil and crushed aggregates (used for the Boxer 300 and 400 series units)
32-inch (81.3 cm) Pin-Style Pallet Forks and Frame with 900 lb (408.2 kg) rated lifting capacity
42-inch (106.7 cm) Pin-Style Pallet Forks and Frame with 900 lb (408.2 kg) rated lifting capacity
Rail-style (ITA mount) pallet fork frame with 2,310 lb (1,047.8 kg) rated lifting capacity
42-inch (106.7 cm) Rail-Style (Class II) Forks with 2,310 lb (1,047.8 kg) rated lifting capacity
48-inch (122 cm) Rail-Style (Class II) Forks with 2,310 lb (1,047.8 kg) rated lifting capacity
The Branch Manager Grapple enables tree care professionals to carry out long loads through tight access yards or easily feed brush through a chipper.
With a 40-inch (101.6 cm) grapple opening and 360-degree hydraulic rotation, the Ryan's Grapple attachment allows arborists to carry a variety of loads.
With a 40-inch (101.6 cm) grapple opening and 360-degree hydraulic rotation, the Ryan's Grapple attachment allows arborists to carry a variety of loads.
With a 52-inch (132.1 cm) grapple opening and 360-degree hydraulic rotation, the Ryan's Grapple attachment allows arborists to carry a variety of loads.
Grind small stumps with the articulating stump grinder attachment. The 14.5” (37 cm) diameter x .5” (13 mm) thick cutting system with 18” (46 cm) tip swing has a bi-directional cutting design with 6” (15 cm) cutting depth.
Fixed skid-steer-style stump grinder with forward-reverse cutting motion with 7″ (17.8 cm) below-ground cutting depth for 300/600 series Boxer units.
Fixed skid-steer-style stump grinder with forward-reverse cutting motion with 7″ (17.8 cm) below-ground cutting depth for 500/700 series Boxer units.
This stump planer easily attaches to high-torque auger drive for a no-mess finish on your stump removals.
Designed for horizontal boring beneath sidewalks and driveways, this earth boring drill accurately bores up to 60′ (18.3 meters) length at 2.5″ (6.4 cm) diameter.
Rod and Reamers for use with Horizontal Earth Drill (Boring Unit) attachment.
Backfill trenches and minimize ground disturbance from blade gouging with the McCullough 1600 Cover-up.
Model 615 Trencher 24-inch (61 cm) boom and crumber with 25 stations, 4.5-inch (11.4 cm) x 24-inch (61 cm) (chain assembly (tooth every station) with cup cutter teeth for sand/silt soils without rocks
Model 615 Trencher 24-inch (61 cm) boom and crumber with 25 stations, 6.0-inch (15.2 cm) x 24-inch (61 cm) (chain assembly (tooth every station) with 70/30 combination shark and cup cutter teeth for clay and sand/silt soils with rocks
Model 615 Trencher 30-inch (76 cm) boom and crumber with 29 stations, 6.0-inch (15.2 cm) x 30-inch (76 cm) chain assembly (tooth every station) with 70/30 combination shark and cup cutter teeth for clay and sand/silt soils with rocks
Model 615 Trencher 36-inch (91.4 cm) boom and crumber with 32 stations, 4.5-inch (11.4 cm) x 36-inch (91.4 cm) chain assembly (tooth every station) with 70/30 combination shark and cup cutter teeth for clay and sand/silt soils with rocks
Model 615 Trencher 36-inch (91.4 cm) boom and crumber with 32 stations, 6.0-inch (15.2 cm) x 36-inch (91.4 cm) chain assembly (tooth every station) with 70/30 combination shark and cup cutter teeth for clay and sand/silt soils with rocks
Model 615 Trencher 48-inch (122 cm) boom and crumber with 41 stations, 6.0-inch (15.2 cm) x 48-inch (122 cm) chain assembly (tooth every station) with 70/30 combination shark and cup cutter teeth for clay and sand/silt soils with rocks
0.75″ (19 mm) to 0.99″ (25.2 mm) diameter cable pull grip to be used with pull bullet assembly
1″ (25.4 mm) to 1.24″ (31.5 mm) diameter cable pull grip to be used with pull bullet assembly
1.25″ (31.8 mm) to 1.49″ (37.9 mm) diameter cable pull grip to be used with pull bullet assembly
1″ (25.4 mm) to 1.5″ (38 mm) pipe bullet assembly for pulling pipe (attaches to blade with 0.375″ (10 mm), GR-8 bolt)
2.5″ (63.5 mm) diameter pull bullet assembly for pulling cable (attaches to blade with 0.375″ (10 mm), GR-8 bolt)
Allows irrigation, landscape, utility and electrical contractors to pull pipe, cable and electrical wire up to 1.5″ (38 mm) diameter (for use with Boxer 300/600 series units)
Allows irrigation, landscape, utility and electrical contractors to pull pipe, cable and electrical wire up to 1.5″ (38 mm) diameter (for use with Boxer 500/700 series units)
Used for direct vibratory plowing applications. This blade type is used in conjunction with pipe or pull bullet assemblies, pulling from a stationary reel.
Used for direct vibratory plowing applications. This blade type is used in conjunction with pipe or pull bullet assemblies, pulling from a stationary reel.
Used for direct vibratory plowing applications. This blade type is used in conjunction with pipe or pull bullet assemblies, pulling from a stationary reel.
Used for direct vibratory plowing applications. This blade type is used in conjunction with pipe or pull bullet assemblies, pulling from a stationary reel.
Used with cable reel mount option for pulling cable or cable-in-conduit up to 0.5″ (13 mm) diameter maximum
Used with cable reel mount option for pulling cable or cable-in-conduit up to 0.5″ (13 mm) diameter maximum